View 85EPF10_493450.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin I2153 rev. D 12/02
QUIETIR Series 85EPF..HV
FAST SOFT RECOVERY RECTIFIER DIODE IF(RMS) = 160A VF trr < 1.4V @ 100A = 95ns
VRRM 800 to 1200V
Major Ratings and Characteristics Characteristics
IF(AV) Rect. Conduction 50% duty Cycle @ TC = 85 C IF(RMS) VRRM range (*) IFSM VF trr TJ @ 100 A, TJ = 25C @ 1A, - 100A/s range 160 800 to 1200 1100 1.4 95 - 40 to 150 A V A V ns C
Description/ Features Units
A The 85EPF.. fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Available in the new PowIRtab TM package, this new series is suitable for a large range of applications combining excellent die to footprint ratio and sturdeness connectivity for use in high current environments. Typical applications are both: Output rectification and freewheeling in inverters, choppers and converters Input rectifications where severe restrictions on conducted EMI should be met.
85EPF..
85
Case Styles 85EPF.. 85EPF..J
(*) for higher voltage up to 1600V contact factory
www.irf.com
1
85EPF.. HV QUIETIR Series
Bulletin I2153 rev. D 12/02
Voltage Ratings
VRRM , maximum Part Number peak reverse voltage V
85EPF08 85EPF10 85EPF12 800 1000 1200
VRSM , maximum non repetitive peak reverse voltage V
900 1100 1300
IRRM 150C mA
15
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM I 2t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2t for fusing
85EPF..
85 1100
Units
A A
Conditions
@ TC = 85 C, 180 conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied
1250 5000 7000 A2 s A2s
10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied
I2t
Max. I2t for fusing
70000
Electrical Specifications
Parameters
VFM rt Max. Forward Voltage Drop Forward slope resistance
85EPF..
1.36 4.03 0.87 0.1 15
Units
V m V mA
Conditions
@ 85A, TJ = 25C TJ = 150C TJ = 25 C TJ = 150 C
VF(TO) Threshold voltage IRM Max. Reverse Leakage Current
VR = rated VRRM
Recovery Characteristics
Parameters
trr Irr Qrr S Reverse Recovery Time Reverse Recovery Current Reverse Recovery Charge Snap Factor
85EPF..
480 7.1 2.1 0.5
Units
ns A C
Conditions
IF @ 85Apk @ 25A/ s @ 25C
2
www.irf.com
85EPF.. HV QUIETIR Series
Bulletin I2153 rev. D 12/02
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
85EPF..
- 40 to 150 - 40 to 150 0.35 40 0.2 6 (0.21) Min. Max. 6 (5) 12 (10)
Units
C C C/W C/W C/W g (oz.) Kg-cm (Ibf-in)
Conditions
RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight MountingTorque Case Style
Maximum Allowable Case Temperature (C) 150 140 130 120 110 100 90 80 70 0 10 20 30 30 40 60 50 60
DCoperation
Mounting surface , smooth and greased
PowIRtab TM
Maximum Allowable Case Temperature (C) 150 140 130 120 110 100 90 80 70 0 20 30 40 60 90 120 80 180 100 DC 120 140
Conduction Period
85EPF.. Series R thJC (DC) = 0.35 K/W
85EPF.. Series R thJC (DC) = 0.35 K/W
Conduction Angle
180 90 120 70 80 90
60
Average Forward Current (A)
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) 160 140 120 100 80 60
Conduction Angle
Fig. 2 - Current Rating Characteristics
200 180 160 140 120 DC 180 120 90 60 30
180 120 90 60 30 RMS Limit
100 RMS Limit 80 60 40 20 0 0 20 40 60 80
Conduction Period
40 20 0 0 10 20 30 40 50 85EPF.. Series T J = 150C 60 70 80 90
85EPF.. Series T J = 150C 100 120 140
Average Forward Current (A)
Average Forward Current (A)
Fig. 3 - Forward Power Loss Characteristics
Fig. 4 - Forward Power Loss Characteristics
www.irf.com
3
85EPF.. HV QUIETIR Series
Bulletin I2153 rev. D 12/02
Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) 1200 1100 1000 900 800 700 600 500 400 300 1 85EPF.. Series 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 0.01 85EPF.. Series 0.1 Pulse Train Duration (s) 1
Maximum Non Repetitive Surge Current Versus Pulse Train Duration.
At Any Rated Load Condition And With Rated V RRM Applied Following Surge.
Initial T J = 150C J @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
Initial TJ = 150C No Voltage Reapplied Rated VRRM Reapplied
10
100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
1000 Instantaneous Forward Current (A)
Fig. 6 - Maximum Non-Repetitive Surge Current
100 T J = 25C 10 T J = 150C
85EPF.. Series 1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
Maximum Reverse Recovery Time - Trr (s)
Maximum Reverse Recovery Time - Trr (s)
0.22 0.2 0.18 0.16 0.14 0.12 0.1 0.08 0.06 0.04 0 85EPF.. Series T J = 25C 40 80 120
1A 10 A I FM = 125 A 80 A 40 A
0.6 0.5 0.4 0.3 0.2 0.1 0
85EPF.. Series T J = 150C
I FM = 80 A 40 A 20 A 10 A
20 A
1A
160
200
0
40
80
120
160
200
Rate Of Fall Of Forward Current - di/dt (A/s)
Rate Of Fall Of Forward Current - di/dt (A/s)
Fig. 8 - Recovery Time Characteristics, TJ = 25C
Fig. 9 - Recovery Time Characteristics, TJ = 150C
4
www.irf.com
85EPF.. HV QUIETIR Series
Bulletin I2153 rev. D 12/02
Maximum Reverse Recovery Charge - Qrr (C) Maximum Reverse Recovery Charge - Qrr (C) 4 3.5 3 2.5 2 1.5 1 0.5 0 0 40 80 120 160
10 A
85EPF.. Series T J = 25C
14 12 10 8 6 4 2 0
40 A
I FM = 125 A 80 A 40 A 20 A
85EPF.. Series T J = 150C
I FM = 80 A
20 A 10 A
1A
1A
200
0
40
80
120
160
200
Rate Of Fall Of Forward Current - di/dt (A/s)
Rate Of Fall Of Forward Current - di/dt (A/s)
Fig. 10 - Recovery Charge Characteristics, TJ = 25C
Maximum Reverse Recovery Current - Irr (A) 22 20 18 16 14 12 10 8 6 4 2 0 0 40 80 120 160 200
1A
Fig. 11 - Recovery Charge Characteristics, TJ = 150C
Maximum Reverse Recovery Current - Irr (A) 45 40 35 30 25 20 15 10 5 0 0 40 80 120 160 200
1A
85EPF.. Series T J = 25C
I FM = 125 A 80 A 40 A 20 A
85EPF.. Series T J = 150C
I FM = 80 A
40 A 20 A 10 A
10 A
Rate Of Fall Of Forward Current - di/dt (A/s)
Rate Of Fall Of Forward Current - di/dt (A/s)
Fig. 12 - Recovery Current Characteristics, TJ = 25C
Transient Thermal Impedance Z thJC (K/W) 1
Fig. 13 - Recovery Current Characteristics, TJ = 150C
Steady State Value (DC Operation)
0.1
D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 85EPF.. Series
0.01 0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 14 - Thermal Impedance ZthJC Characteristics
www.irf.com
5
85EPF.. HV QUIETIR Series
Bulletin I2153 rev. D 12/02
Outline Table
Case Style PowIRtabTM Dimensions in millimeters and (inches)
Case Style PowIRtabTM "J" version Dimensions in millimeters and (inches)
6
www.irf.com
85EPF.. HV QUIETIR Series
Bulletin I2153 rev. D 12/02
Ordering Information Table
Device Code Base Cathode BASE 2 CATHODE
85
1 1 2 3 4 5 6 65 -
E
2
P
3
F
4
12
5
J
6
Current Rating Circuit Configuration: E = Single Diode Package: P = TO-247AC Type of Silicon: F = Fast Recovery Voltage code: Code x 100 = VRRM none=PowIRtabTM standard J = Short Lead Version6
(*)
CATHODE 1
ANODE 3
Anode
Anode
08 = 800V 10 = 1000V 12 = 1200V
(*) for higher voltage up to 1600V contact factory
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/02
www.irf.com
7
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 85EPF10

	To Download 85EPF10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .